Know Everything About Shop Press Bending Brake

Since 1993, Proshort Stamping Services, Inc. has been thriving in the Tri-County area and beyond.

When it comes to press bending brakes, these serve as crucial pieces in metal forming services. It is common in various manufacturing shops because of its capabilities of forming metal. The device can change the shape of metal objects by applying huge force. It is highly useful when it comes to bending sheet metal at a defined angle.

Let’s find here some of the useful details related to shop press bending brake.

How Shop Press Bending Brake applies Force

Well, this is something that you may definitely be curious to know about. It applies force in the following ways

1. Hydraulic

As the name suggests, hydraulic fluids that are stored in cylinders apply force on the ram of the device to make it down onto metal to shape. It gives a better control compared to mechanical and one can adjust it for individual bend depths.

2. Mechanical

As one of the traditional technologies, it is based on the principle of leveraging flywheel operated by an electric motor to apply force for metal forming services. The technology is popular for being quick and accurate.

3. Servo-Electric

This is another technology of shop press bending brake that is based on using an electric motor to power up and control the ram’s movement. When compared to other technologies, you will find it quick and also highly efficient.

4. Pneumatic

These types of brakes make the right use of pressure to bring rams into motion be it up or down. These are quite similar to those of hydraulic presses, but it is available with a lower tonnage limit.

What are Different Parts of Shop Press Bending Brake?

Well, the shop press bending brake consists of multiple parts to function properly. Explore here some of the vital components of shop press bending brake.

  • Bed
  • Ram
  • Dies
  • Backgauge
  • Computer Numerical Control (CNC) System

What are Different Types of Bending Operations?

Bottoming and air bending are the two most crucial types of bendings operations that take place on a press brake. When it comes to bottoming operations, it involves bending the material to the bottom of the die for ensuring the shape of the die.

If we talk about the advantage of bottoming, it doesn’t need a precise brake for getting accurate bends. The accuracy of the bend is something that depends on the die’s shape.

Air bending, on the contrary, involves just pushing the material that gets bent far into the die. In this, the material is not pressed to the die’s bottom and also simply leaves a small pocket of air. So, in this, you need to change the die only in case the thickness of materials changes. Besides, it also needs a little bit of force compared to bottoming but needs a higher level of precision.

Final Thought

Shop press bending brake is one of the most sought-after devices, used to a wider extent in PEM insertion services. So, after going through the above content, you are now expected to have enough information regarding bending brake.

Leave a Reply

Your email address will not be published. Required fields are marked *